Having a 24/7 WiFi network is necessary these days. Especially, when you have a huge house, you must have a WiFi extender. A good WiFi extender will boost your current network’s range. For instance, the Altice WiFi extender is among the top extenders of all time. You just need to know the proper procedure for the Altice WiFi extender setup.
The correct setup will ensure the proper functioning of the extender. Thus, you must know the complete process to set up the Altice WiFi extender. By setting up the extender, you can get rid of all dead zones in your house. That’s why you need to know the complete process for the range extender setup.
If you want to know the procedure for the Altice WiFi extender setup, we’ve got you. We are here with this post to help users set up the extender. This post will consist of the complete instructions for the setup. We will also discuss the Altice WiFi extender not working issue and the troubleshooting methods.
Requirements for the Altice WiFi Extender Setup
To set up the Altice extender, there are some things you must have. With all the necessities, you can set up the extender correctly. The requirements for the setup are as follows:
- A setup router
- The IP address
- An Ethernet cable
- The default login password
- Your smartphone or PC
These are some methods you can use to fix the issues within the extender. Further, we will discuss the procedure for the setup.
Steps for the Altice WiFi Extender Setup
Now that you know the requirements, you can set up the extender correctly. You must also know there are two methods you can use to set up the extender. The first method is via the web interface and the other is using the WPS button. For the former, you just need to log into the web interface. Additionally, you can set up the extender within a few minutes using the WPS button. The instructions for both methods are as follows:
Altice WiFi Extender Setup Through the Web Interface
- Initially, connect your smartphone to the extender’s network.
- You can use an Ethernet cable to connect your PC to the extender.
- Now, open a web browser and enter the IP address in the address bar.
- When the login page appears, enter the default password in the field.
- Hereon, the extender will search for all the available networks.
- You need to select yours from the list and enter the correct password.
- After that, once a connection is formed, configure the settings correctly.
- Ensure to set up a strong password for your extender’s network.
- Finally, save the settings and relocate the extender near the dead zones.
Altice WiFi Extender Setup Via the WPS Button
- To begin with, place the extender and the router in the same room and power them on.
- Now, locate the WPS button on the router and press the button for 2 seconds.
- Within 2 minutes, press the WPS button on the extender to form a connection.
- Give the extender some time to connect to the router successfully.
- At last, place the extender closer to the dead zones for a proper network range.
These are the steps for the Altice WiFi extender. Once, the setup is complete, you must place them near the dead spots to eliminate them. But keep in mind, if the extender is too far from the router, the connection will break. Further, we will discuss the troubleshooting methods for the issue.
Troubleshooting the Altice WiFi Extender Not Working Issues
Due to various reasons, you face issues with the Altice WiFi extender. Whenever you face such an issue, you cannot make the most of the extender. To troubleshoot the extender not working, follow the below-mentioned methods:
Provide a Power Supply
- For the WiFi extender to work properly, it needs a consistent power source.
- The range extender won’t function at all without one.
- As a result, make sure you attach the extension and router to a reliable power source.
- Make sure that both devices’ current power sources are operating properly.
- If not, you can always plug both devices into a reliable outlet.
- This should fix the Altice WiFi extender not working issue.
Power Cycle the Extender
- If the WiFi range extender is having any minor issues or bugs, try restarting it.
- At the very least once each week, we advise restarting the smart home appliances.
- Start by unplugging the extension and turning the power off.
- Allow it to cool for a while to fix any issues.
- You can turn it back ON when at least one minute has passed.
- The Altice extender problem should be resolved at this point.
- To resolve any issues with the router, you can also restart it.
Move the Extender and Router Closer
- After setting everything up, you can move the extender to a location with a weak signal.
- However, you must ensure to place the extender within the router’s coverage area.
- The connection will deteriorate and the extender won’t function if you install it too far from the router.
- The Altice WiFi extender not working issue should be resolved by moving the extender closer to the router.
Reset the Extender
- If none of these methods are working, you must reset the extender.
- The reset will fix all glitches and bugs within the extender.
- To reset the extender, locate the reset button.
- Now, press the reset button and hold it.
- After 5-10 seconds, you can release the button.
- The reset is successful and all the factory default settings are back.
These are the effective method you can use to fix the Altice WiFi extender not working. Now the extender should be working well. We hope you understood the procedure for the setup and the troubleshooting methods. If you face any issues with your extender, reach out to our team right now.