Are you struggling with weak wifi connections and dead zones? Get a reliable and smart solution for home networking, i.e., Setek wifi extender, packed with magnificent features and latest technology. However, to get the most out of your WiFi extender, you must perform the Setek Wifi Extender Setup appropriately.
The Setek extender won’t function effectively if the setup isn’t done correctly. As a result, you must configure the extender according to the specified Setek WiFi extender setup guidelines. Don’t worry if you’ve been wondering how to setup Setek Wifi Extender in the best way possible. We have provided you with the quick steps to set up your range extender within minutes. Make sure you follow this post carefully till the end.
Performing the Setek Wifi Extender Setup Through the WPS Method
Setting up the Setek WiFi extender using the WPS method is super easy. To initiate the Setek Wifi Extender Setup using WiFi Protected Setup, please follow the steps given in this section:
- First of all, make sure the router and the extender are in the same room.
- Then, power on your device and wait until the LED on the extender turns solid green.
- Next, locate the WPS buttons on the router and extender.
- After that, press & hold the button on the router for 2-3 seconds.
- Within 2 minutes, press this button on the extender for 2-3 seconds and wait for the LED.
- Now, you can see a blinking LED on the extender, signaling a successful wifi connection.
- You can move the extender once the connection is made.
- At last, ensure to locate the extension in the best possible spot.
How to Setup Setek Wifi Extender Via a Web Browser?
To setup Setek WiFi extender using a web browser, you must follow the steps below. Make sure you use an up-to-date web browser on your system. Further, follow these quick steps to set up your extender:
- Initially, place the extender and router in the same room.
- Then, connect your computer or mobile device to the network of the extender.
- Now, choose either Ethernet cables or wireless connections for connecting the devices.
- Enter the 192.168.10.1 IP address of the extender in any web browser on that device.
- Then, the extender’s login page will now show up.
- Next, fill in the blanks with the default login and Setek extender setup password.
- The label of the extension contains the default login information.
- Now, the extender’s user interface will show up.
- Choose your router’s SSID and input the password to establish a connection.
- Then, follow the on-screen guidelines to complete the Setek WiFi extender setup.
Quick Tips to Fix the Setek Wifi Extender Setup Issues
If you face any issues while setting up your Setek WiFi extender, please follow the instructions below. These instructions will help you troubleshoot the problem without any hassle:
- Firstly, ensure a stable power supply to your extender.
- After that, make sure you place your extender near the router while setting it up.
- You must remember the WiFi credentials of your main router’s network.
- Enter the default IP address of the extender only in the address bar.
- Once you reach the Setek Wifi Extender Setup wizard, make sure you follow the on-screen prompts carefully.
- Enter the correct WiFi password when connecting the extender to the router’s network.
- Lastly, you must check for the latest firmware updates.
- Upgrade your device to the latest version using the appropriate steps.
- If you still face any issues, reset the Setek WiFi extender using the reset button.
- Finally, reconfigure the Setek extender to resolve the issues.
Conclusion
In short, you learned the Setek Wifi Extender Setup with the help of the aforementioned instructions. It is very easy to configure your device with the router’s network. All you have to do is ensure you enter the correct WiFi password and other credentials in the setup wizard. We hope you liked this post and that it helped you go through the initial configuration of your new Setek WiFi extender without any hassle. For more assistance, feel free to talk to our support team.
FAQs
How do I reset my Setek Wi-Fi extender?
To reset Setek WiFi extender, use the reset button located on your device. At this time, the device must be powered On. Press and hold the reset button for a good 10 seconds on your Setek WiFi extender. Release the button and wait for a few seconds. Finally, the extender will revert to the factory default settings successfully.
Can I use more than one Setek Extender with my router?
Yes, you can use more than one Setek extender with your router. However, ensure that you configure all the additional extensions appropriately. We suggest that you do not add more than two extenders, as it will make your setup complicated.
Is Setek Extender a dual-band extender?
Yes, the Setek WiFi extender is a dual-band extender that supports 2.4GHz and 5GHz networks. You must configure both networks as per your requirements.