How to Setup Joowin WiFi Extender?

Are dead zones in your home annoying you? Get the Joowin WiFi extender setup in your home, then configure it to eliminate any WiFi-unavailable places. To get the most out of the extender, simply continue with the Joowin setup. One of the best extenders is the Joowin one. This extender features a fast internet connection and flawless network coverage. You must correctly set up this extender before you can begin using it. All you have to do is log into the web portal to complete the setup.

With the aid of the accurate Joowin WiFi extender setup instructions, you can configure the extender. We created this blog in order to assist users in comprehending the entire setup process. This blog will walk you through the entire setup procedure. In addition, we’ll go over potential setup problems and troubleshooting techniques if you come across the Joowin WiFi extender not working issue.

Requirements for Joowin WiFi extender setup 

You need a few items in order to set up the extension. Once you have everything you need, you can accurately set up the extension. The following items are necessary for the setup:

• The default IP address 
• A cable for Ethernet
• The first login information
• A live connection to the internet
• Your laptop or smartphone

These are the prerequisites needed to set up the Joowin WiFi extender. We will also go over the setup processes in this section.

JooWin WiFi extender setup methods 

There are two ways to set everything up. You have two options for configuring it: the Joowin app or the web browser. You need the router’s username, password, and default IP address in order to use the previous technique. If not, all you need to do is install the Joowin app and correctly configure the extension. Here are the steps to follow for setting up:

Method 1: Setup Joowin extender via web interface

1. Firstly, join the network of the extender with your PC or smartphone.
2. To connect your PC to the router, use an Ethernet cable.
3. In the address bar of a web browser, type the IP address now.
4. After that, type the default login credentials when the login page loads.
5. The extender’s web interface will then show up on the screen.
6. All of the nearby networks that are accessible will be found by the extender through search.
7. Subsequently, you must choose your WiFi network and input the accurate password.
8. Allow the extension some time so that it can establish a successful connection with the router.
9. The web interface allows you to correctly adjust the extender’s parameters.
10. When you are finished setting everything up, move the extension close to

Method 2: Joowin WiFi extender setup via app 

1. Firstly, install the Joowin app on your smartphone.
2. The Play Store and App Store provide the app for download
3. Now launch the app and create an account to log in.
4. The app will now search through all of the neighboring networks.
5. Your WiFi network must be chosen from the list.
6. Next, to establish a connection, enter the correct WiFi password.
7. After establishing a connection, the precise configuration of the settings is possible.
8. Finally, after everything is set up, you can relocate the extension.

Joowin WiFi extender not working. What to do?

If you face any issues with your device, make sure you follow the steps given below:

1. If you observe your Joowin extender not woroking, make sure you reboot your device. 
2. After that, check for the latest firmware updates.
3. If any updates are available for your device, follow the on-screen prompts to upgrade your WiFi range extender. 
4. In case you still come across the same issue, please reset your device to the factory default settings. 
5. Press and hold the reset button for a good 10 seconds on your Joowin extender. 
6. Release the button and wait for a few seconds. 
7. At last, the extender will start working 

Conclude

This post was all about the Joowin Wifi extender setup and installation. We discussed how to set up your new Joowin WiFi range extender using two main methods. You can either use the app method or the web interface method. Although all the methods are easy, you can still choose any of the aforementioned methods as per your convenience. 

Moreover, we also discussed the troubleshooting steps in case you come across the Joowin wifi extender not working issue. If you experience any such issues in future, make sure you feel free to talk to our support team.

FAQs