How to Set Up Setek Wi-Fi Extender?

Setek Wi-Fi Extender Setup

Setek Wi-Fi Extender Setup Instructions

You must correctly complete the Setek WiFi extender setup in order to get the most out of your WiFi extender. Your WiFi network will cover more areas than usual if you setup Setek WiFi extender appropriately. The Setek extender won’t function effectively if the setup isn’t done correctly. As a result, you must configure the extender in accordance with the specified Setek WiFi extender setup guidelines. After the Setek WiFi extender setup, you may eliminate dead spots in your home and have high-speed internet access throughout. 

Don’t worry if you’ve been wondering how to setup Setek WiFi extender in the best way possible. We have provided you with the most comprehensive post with the Setek setup instructions today. Make sure you follow this post carefully till the end.

How to Set Up Your Setek Wi-Fi Extender Through the WPS Method

Setting up the Setek WiFi extender using the WPS method is super easy. To setup Setek WiFi extender using WiFi Protected Setup, please follow the steps given in this section:

  1. Make sure the router and the extender are in the same room first.

  2. Next, locate the WPS buttons on the router and extender.

  3. After that, press the router’s WPS button to go about the Setek WiFi extender setup.

  4. Press the WPS button on the extender now within the next two minutes.

  5. Give the extension and router some time to establish a connection.

  6. You can move the extender once the connection is made.

  7. Make sure to locate the extension in the best possible spot.

How to Set Up a Setek Wi-Fi Extender Via a Web Browser 

To setup Setek WiFi extender using a web browser, you must follow the steps below. Make sure you use an up-to-date web browser on your system:

  1. Place the extender and router in the same room first, then connect your computer or mobile device to the network of the extender.

  2. Ethernet cables and wireless connections are both acceptable methods of connecting.

  3. Enter the IP address of the extender in any web browser on that device.

  4. The extender’s login page will now show up.

  5. Next, fill in the blanks with the default login and Setek WiFi extender setup password.

  6. The label of the extension contains the default login information.

  7. The extender’s user interface will now show up.

  8. The next step is to choose your router’s SSID and input the password to establish a connection.

Troubleshoot Tips

If you face any issues while setting up your Setek WiFi extender, please follow the instructions below. These instructions will help you troubleshoot the problem without any hassle:

  1. Firstly, ensure a stable power supply to your extender. 

  2. After that, make sure you place your extender nearby the router while setting it up. 

  3. You must remember the WiFi credentials of your main router’s network. 

  4. Enter the default IP address of the extender only in the address bar. 

  5. Once you reach the Setelk WiFi extender setup wizard, make sure you follow the on-screen prompts carefully. 

  6. Enter the correct WiFi password when connecting the extender to the router’s network. 

  7. At last, you must check for the latest firmware updates. 

  8. Upgrade your device to the latest version using the appropriate steps. 

  9. If you still face any issues, reset Setek WiFi extender using the reset button. 

  10. Finally, reconfigure the Setek extender to resolve the issues. 

FAQs

How do I reset my Setek Wi-Fi extender?

To reset Setek WiFi extender, use the reset button located on your device. At this time, the device must be powered On. 
Press and hold the reset button for a good 10 seconds on your Setek WiFi extender. Release the button and wait for a few seconds. Finally, the extender will revert to the factory default settings successfully.

Can I use more than one Setek Extender with my router?

Yes, you can use more than one Setek extender with your router. However, ensure that you configure all the additional extended appropriately. We suggest that you do not add more than two extenders as it will make your setup complicated. 

Is Setek Extender a dual-band extender?

Yes, Setek WiFi extender is a dual-band extender that supports 2.4GHz and 5GHz networks. You must configure both networks are per your liking.

Conclusion

This page was all about the Setek WiFi extender setup. We hope you learned how to setup Setek WiFi extender with the help of the aforementioned instructions. It is very easy to configure your device with the router’s network. All you have to do is, ensure you enter the correct WiFi password and other credentials in the setup wizard. 

We hope you liked this post and that it helped you go through the initial configuration of your new Setek WiFi extender without any hassle. For more assistance, feel free to talk to our support team.

Scroll to Top