How to Setup the Belkin Range Extender? 

Belkin range setup is all about the initial configuration of your device. You can use the default web address by typing “http://belkin.range.” The web address takes you to the web interface where you may configure your wifi extender’s settings. In order to enjoy the extended network, you must first configure your Belkin range extender. Moreover, you can also use the WPS button to go about the Belkin range extender setup. 

Although both methods are easy, we suggest users to follow the web interface method to go about the Belkin Wi Fi extender set up. The default web address allows you to visit your range extender and configure its wireless settings in accordance with the router’s network. The Belkin extender setup consists of pairing your device with your router so that the extender can pick up the router’s signals. When your extender picks up your router’s signals, it enhances network throughput to provide an uninterrupted network in difficult-to-reach sections of your home.

How to prepare for Belkin Range Extender setup?

If this is your first time with the Belkin extender setup, there are certain steps that you must follow in order to avoid any issues. Please refer to the points below to learn how to prepare for the Belkin range setup:

1. Make sure you place your extender nearby the router. 
2. Plug your Belkin extender into a stable power outlet. 
3. You must remember your router’s WiFi credentials. 
4. You can use an Ethernet cable to connect the extender to the computer. 
5. An updated web browser is a must-have. 

Methods to Setup the Belkin Range Extender

Belkin Range Extender Setup via Web Interface 

In this section, you will learn how to go about the Belkin extender setup using the web interface. Kindly follow the steps carefully in order to avoid any hassle during the configuration:

1. To begin, keep your extender and router in the same room.
2. Connect your device to the network of the extension.
3. You can connect using an Ethernet cable or wirelessly.
4. Now, on that device, launch a web browser and type belkin.range into the address bar.
5. You can also visit the login page by using the extender’s IP address.
6. When the extender’s login page displays, enter the default credentials.
7. Following that, the extender’s user interface will appear.
8. Access the Belkin wi fi extender set up wizard. 
9. Connect the extender to the network of the router.
10. To successfully connect the extender, enter the correct WiFi password.
11. Finally, after the connection is established, the extender can be relocated.

The Belkin range extender setup using the web interface will be completed successfully. 

Belkin Range Extender Setup via the WPS Method 

To go about the Belklin range extender setup using the WPS method, follow the steps below:

1. First of all, make sure the WPS button is there on the router as well. 
2. If the router does not have the WPS button, it indicates that it is not compatible with it. 
3. Now, make sure the extender is plugged into a wall outlet nearby the router. 
4. Press the WPS button on the extender and wait. 
5. Within 2 minutes, press the WPS button on your router as well. 
6. Wait for a few seconds. 
7. After that, both devices will pair successfully. 
8. Finally, the Belkin range setup via the WPS method will be completed. 

Conclusion 

This page was all about the Belkin wi fi extender set up and installation. The Belkin range extender setup can be done with the help of two different methods. You can either choose to use the WPS method or you can access the web interface of your device. Although both ways are easy, we recommend that you use the web interface method to set up your range extender. 

We hope you liked this post and that it helped you learn how to go about the initial setup and installation on your new Belkin WiFi extender. If you experience any issues with the Belkin range extender setup or you have any queries, feel free to talk to our support team for more help. 

FAQs