Enhancing Your WiFi Signal: The Ultimate Linksys WiFi Extender Setup Guide

Linksys WiFi extender setup using the default web address http://extedner.linksys.com is super easy. You simply need to use this web address with the help of a web browser on a connected device. Go to the login page, login to the Linksys extender, and configure the initial settings of your wireless range extender. 

The Linksys extender’s main role is to increase the WiFi coverage of your existing router’s network. However, there are certain things that you need to learn before the setup or even during the setup. This is where most users come across different issues. Well, you don’t have to worry about it as you are on the right webpage and we will help you smoothly go through the Linksys WiFi extender setup. 

Follow this post till the end to learn everything related to the Linksys extender setup. 

How to prepare for the Linksys WiFi Extender Setup 

There are a few points you need to go through before setting up your range extender. These points will ensure you don’t get caught at any step whilst in the middle of the setup. 

1. Place the extender nearby the router 
2. Make sure you keep your extender’s antennas in an upright position (if any)
3. Ensure stable power supply to the extender and the router 
4. Take note of the WiFi credentials of your router 
5. Use a smartphone or computer 
6. Make sure the web browser is up-to-date
7. You must ensure your router supports WPS configuration (for the WPS method)

Methods for Linksys WiFi Extender Setup 

Your extender can be configured using two different methods – the manual method and the WPS method. We have discussed both methods in this section for your easy understanding. Please follow the steps carefully:

Method 1: Manual Method

The manual method involves the initial setup of your device using the private web address http://extender.linksys.com. Basically, you need to access the web interface of your extender and follow the instructions accordingly:

1. Firstly, plug your extender into a wall outlet. 
2. Secondly, turn On your extender and connect it to your computer. 
3. Go to your computer and open a web browser to go about the Linksys WiFi extender setup. 
4. After that, type the default web address in the address bar. 
5. Type http://extender.linksys.com and press Enter. 
6. Thereafter, you will reach the Linksys login page. 
7. Fill in the username and password. Type “admin” in both fields and click Login. 
8. Finally, you will reach the web interface of the extender. 
9. Go to the setup wizard. The extender will search for active networks around.
10. Select your router’s network from the list and enter the WiFi password. 
11. Finalize the Linksys extender configuration. 
12. At last, click Save. the Linksys WiFi extender setup will be completed successfully. 

Method 2: WPS Method

The second method is all about the WPS method. Your router must sport the WPS button. If it does not sport the WPS button, it means the router is not compatible with this method. Follow the steps below:

1. Firstly, make sure the Linksys extender is active and so is the router. 
2. After that, press the WPS button on the extender. 
3. You don’t need to hold down the button. 
4. Thereafter, press the WPS button on your router. 
5. All this must be completed within two minutes or else the WPS configuration will fail. 
6. At last, wait for a few minutes to allow both devices to pair. 
7. Finally, the Linksys WiFi extender setup using the WPS method will be successfully completed. 

Conclusion

The Linksys WiFi extender setup and installation are way too easy than you might think. Firstly, you must go through the configuration part and then proceed with the installation. The installation is simple as you are just required to place the extender in a suitable place. Make sure you do not place your device too far away from the main router. 

This post was all about the extender setup using http://extender.linksys.com and the WPS method. We hope you liked this page and that it helped you learn both methods of setting up the Linksys extender. If you experience any issues with the setup or have any queries, feel free to talk to our support team for more help. 

FAQs