How to Setup and Configure the Tenda WiFi Extender Step by Step?

Tired of dead zones in your house? Set up Tenda WiFi extender and configure the settings correctly. You can get rid of all dead zones in your home with the help of this extender. This extender has an impeccable WiFi range with a high-speed internet connection. All you need to do is set up this extender and connect it to your. After a proper setup, you can experience good signal strength all over the house. Thus, you must know the correct procedure for the setup.

You can proceed with the Tenda WiFi extender setup accurately with the correct instructions. That’s why we are here with this post to help users understand the setup procedure. In this blog, we will talk about the complete procedure for the setup. We’ll also cover some frequently asked questions that can be helpful for the users.

Requirements to Set Up Tenda WiFi Extender

To proceed with the Tenda WiFi extender setup, there are things you must have. When you have all the necessities, you are able to set up the extender correctly. The requirements are as follows:

• A setup router
• An Ethernet cable
• The default IP address
• A web browser
• Your smartphone or PC

These are some things you must have to set up the extender properly. Further, we will discuss the procedure for the setup.

Steps for the Tenda WiFi Extender Setup

Now that you know the requirements to set up Tenda WiFi extender, you can set it up correctly. You must also know there are two methods you can use to set up the extender. In the first method, you can set it up through the web interface. For the other method, you can set up the extender using the WPS button. The steps for both methods are as follows:

Set Up Tenda WiFi Extender Via Web Interface

• Firstly, power on the extender and router by plugging them into a stable power source. Also, ensure to place them together and connect them using an Ethernet cable.
• Now, you must connect your smartphone or PC to the extender’s network. You can use another Ethernet cable to connect your PC to the extender.
• On that device, open a web browser of your choice. In the address bar of the browser, enter the default IP address to access the login page of the extender.
• Hereon, the user interface of the extender will appear on the screen. From the Wireless Settings, you need to choose the AP Repeater mode.
• You can change the default SSID of the repeater. Then, click Open Scan and the extender will search for all the available networks.
• After that, you need to select your WiFi network from the settings and enter the correct password. Give the extender some time to form a connection with the router.
• Once the connection is successful, the extender will reboot. You need to wait till the extender is back on before you start using it.
• At last, you can disconnect the Ethernet cable and relocate the extender near the dead zones. Just ensure to keep the extender inside the router’s range.

Tenda WiFi Extender Setup Using the WPS Button

• To begin with, place the router and the extender together and power them on.
• Now, press the WPS button on the router and hold it for 1-3 seconds.
• Within 2 minutes, press the WPS button on the extender twice rapidly.
• The WPS LED on the extender should light up bright for 2 seconds and start blinking.
• When the WPS LED on the extender stabilizes and turns green, the connection is made.
• Finally, you can relocate the extender and connect your devices to it.

These are the methods to set up Tenda WiFi extender. Once you are done with the setup, you can configure the settings of the extender correctly. After the setup, you can relocate the extender and connect your devices to it. If there’s anything else you require assistance with, you can reach out to us right now.

FAQs