One of the most amazing WiFi repeaters is the Hyzom WiFi range extender. The WiFi signal of the Hyzom extender can actually flow through walls and concrete floors, unlike that of certain other extenders. Consequently, expanding the WiFi signal to every room, regardless of distance. You just need to setup Hyzom WiFi extender to make the most of the extender.
With the help of this extender, you can make the most of the extender. All you need to do is set up the extender by logging into the web interface. After logging in, you can set up the extender correctly. The web interface will give you complete access to the extender’s network. Thus, you must know the proper procedure for the Hyzom WiFi extender setup.
If you want to know how to setup Hyzom WiFi extender, we’ve got you. We are here with this post to help users set up their extenders correctly. This post will guide users to set up their extenders. We will also discuss the issues you could face with the setup.
Necessities for the Hyzom WiFi Extender Setup
To set up the extender, there are some things you must have. With all the necessary items, you can set up the extender correctly. The requirements for the setup are as follows:
- A setup router
- The default IP address
- An Ethernet cable
- The default login credentials
- Your smartphone or PC
These are the requirements for the Hyzom WiFi extender setup. Further, we will discuss the procedure for the setup.
Steps to Setup Hyzom WiFi Extender
To set up the extender, there are two methods you can use. You can either set it up through the web interface or via the WPS button. In the first method, you require the default IP address and default login credentials to log in. For the other method, you just need to ensure your router also supports the WPS button. The steps for both methods are as follows:
Hyzom WiFi Extender Setup Through the Web Interface
- To begin with, power on the extender and the router and place them in the same room.
- Now, connect your device to the extender’s network to proceed with the setup.
- Open a web browser and type the extender’s IP address into the address bar.
- Hereon, the login of the extender will appear, and enter the login credentials.
- The extender will scan for all the available networks around the extender.
- After that, enter the correct WiFi password to form a connection.
- Once the connection has formed configure the settings accordingly.
- At last, save the settings and relocate the extender near the dead zones.
Setup Hyzom WiFi Extender Via the WPS Button
- First of all, power on the extender and router and place them together.
- Now, find the WPS buttons on the router and extender.
- Hereon, push the router’s WPS button and hold it for 2 seconds.
- Within two minutes, push the WPS button on the extender.
- Give them some time to form a connection correctly.
- Finally, relocate the extender near the dead zones.
These are the steps for the Hyzom WiFi extender setup. You can set the extender appropriately once the setup is complete. The extender can then be moved wherever you like after that. Keep it close enough to the router to ensure a secure connection. If you are having trouble setting up the extender, keep reading ahead.
Troubleshooting the Hyzom Extender Setup Issues
The Hyzom extender may not be correctly setup for a number of reasons. Your extender may not be at fault; in many cases, the issue is on our end only. You can use a variety of troubleshooting techniques to resolve the problem. The following are the strategies used to resolve them:
Connect to the Extender
- You must connect your device to the extender’s network to properly setup the extender.
- To access the login page, you must connect your device to the extender’s network.
- Otherwise, you cannot log into the extender’s web interface and set up the device.
- You can connect your smartphone to the extender’s network through the WiFi settings.
- To connect your PC to the extender’s network, you must have an Ethernet cable.
Place the Extender & Router Closeby
- To setup Hyzom WiFi extender, the extender and the router must be closeby.
- If the extender and the router are too far from each other, you will face issues.
- Thus, ensure to place them side-by-side while you are setting them up.
- Also, you must plug the extender and the router into a stable power source.
Fix the Web Browser Issues
- There could be issues within the web browser causing the login issues.
- Before you log in, you must erase the browser cache and cookies.
- Also, disable any firewall or ad-blocker enabled on the web browser.
- If the web browser requires any update, you must update it.
- When the issue persists, you must use another web browser for the login.
Reset the Extender
- If none of these methods are working, you must reset Hyzom WiFi extender.
- The reset will fix all glitches and bugs within the extender.
- To reset the extender, locate the reset button and hold it.
- After 8 seconds, you can release the button.
- The reset is successful and all the factory default settings are back.
These are some effective methods you can use to fix the issues within the extender. Now, the setup issues should be gone and you should be able to set it up correctly. We hope you understood the proper procedure for the setup. If there’s anything else you require help with, you can get in touch with our team right now.